Device for Superstar & Antrax Ø10mm Glue-in

DEVICE FOR FIXING RAUMER ANTRAX+SUPERSTAR WITH SDS PLUS

This simple device uses an SDS PLUS attachment and can be used with compatible drills to fix Raumer classic resin anchors when using pre-dosed synthetic resin.

Using a hammer drill allows quick and effortless placement. It also ensures that the resin mixes completely with the catalyst.

• Material: Aluminium anchor chamber. Stainless steel drill attachment point. SDS PLUS shank in extra-strong carbon steel.
• Designed for Raumer Superstar and Antrax glue-in anchor
• Compatible with other standards Ø10mm glue-in anchors like Vertical Evolution Glue-in Anchor, Singing Rock Glue-in Anchor, etc.
• Weight: 85g
• Made in Italy 

INSTALLATION

1. After drilling the Ø12mm hole in the rock, insert the appropriate glass phial (Gebofix TF C10).
2. After removing the spiral drill bit from the drill, fix a standard SDS PLUS drill bit and insert this into the placement device.
3. Then insert the desired anchor into the hole that contains the phial. Strike the anchor lightly with a hammer to break the resin phial.
4. Now fix the placement device over the head of the anchor, and, ensuring that the drill is exactly in line with the hole, slowly begin to rotate the drill spindle using the trigger switch.
5. It is important to start the rotation slowly but even more imperative that it remain exactly in line with the hole. At this point, increase the drill’s rotations.
6. The anchor will be quickly and effortlessly fixed in place.
7. Turn off the drill and immediately turn the anchor in the direction of the load.
8. A small amount of resin will escape around the edges of the hole; ensure that this is spread evenly around the edges to prevent any future water from getting in.
9. The anchor is now perfectly placed.