The GEBOFIX TF anchor system comes in a glass capsule, making installation straightforward. It contains a special vinylester resin and quartz sand, with a hardening catalyst located in a separate internal capsule. When you insert the anchor rod, the capsule breaks, instantly mixing the components to activate the curing process.

Box of 10 capsules
To use with M10 glue-in bolt (10mm)
Recommended glue-in:
Product code: C10
Installation by roto-percussion (product recommendation: Raumer "Spinner" Device)
CE approved option 8, for non-cracked concrete
No expansion effects, so fixings with minimum edge distance and minimum spacing are allowed
High pull-out values
Water impermeable joint
Fast and safe applications
Low shrinkage

Application

For fixing heavy loads on natural stone and concrete supports. Recommended for fixing several high-value anchors with minimum spacing. Indicated for anchors (sectioned) steel concrete rebar (glue-in anchors). In case of high placing depth, use several capsules in a row.

Temperature resistant up to 50 °C; for short periods up to 80 °C
Application temperature: -5 °C up to 25 °C
Storage temperature: 5 °C up to 25 °C
Best before 06- 2027. Storage life: 18 months - As indicated by G&B, the glass capsule could be used after this date if the resin is fluid in the capsule.
Made in Italy